Metallography Products

Abrasive Cut Off Machine Automatic and in Manual Version is availane from cutting Capacity 30 MM to 120 MM Dia. 

Description:

• Absolute minimal deformation, cool & burn-free sample production.
• Effortless cutting by lever mechanism, counter balancing.
• Robust construction and rigid clamping minimizing wheel breakage.
• Large and Effective coolant delivery by unique design of casted wheel guard with focused vains
• Control Panel incorporates door limit switch, emergency stop, illumination on/off & machine-on, switches.
• Indications of door open, power on, pump on. Covering other safety norms.
• Dedicated wheels for very hard , medium hard , soft components and universal wheel, in 10 " , 12 " & 14 ",thickness 1.5mm,2mm,3mm,hole sizes 1" or 1.25",(Al2O3).
• Capacity : 60/80/100 mm Round Specimen.
• Table Top Version for Cutting Cap. 35 mm dia. Hardened peice / 50 mm dia solid stock (soft).

Automatic heavy duty sectioning machine for large cross sections, irregular components.

Cutting Cap. - 130 mm dia. (through hardened 42 HRc) Cutting motion - Cutting wheel swings down on the job (Chope type) or Reciprocating swinging, Automatic Clamping - T slotted bed clamping, fixed vice, Automatic filtration system.

Automatic heavy duty sectioning machine for large cross sections, especially for taking longitudinal sections.

Cutting cap. - 100 mm dia. ( hardened) / 200 mm longitudinal section of shafts ( 40 dia ) Component is fed to the cutting wheel Programmable cycle of clamping, cutting, de-clamping.

Description:

• Double disc variable speed, backed up by high torque, noiseless D.C. motors of 1/2 HP, with D.C drives, driving discs independently.
• Disc dia. - 200 mm. Continuous stepless variable speed up to 1400 r.p.m., with digital R.P.M. indicators.
• Complete Metallography Polishing set up. Double disc variable speed, backed up by high torque, noiseless D.C. motors of 1/2 HP, with D.C drives, driving discs independently.
• Continuous stepless variable speed up to 1400 r.p.m., with digital R.P.M. indicators.
• Anticorrosive- Thick - F.R.P. TOP Water faucet, built-in sink arrangement.
• Specimen storage drawer, paper (independent) storage cupboard.
• Etching reagent, Consumable storage front racks.
• Heavy duty warm air drier for immediate specimen drying, mounted on front. Quick paper change clamping ring.

Description:

• Just Press a button and get the mould.
• Dual mould capability Pneumatically operated.
• Reliable microcontroller based technology offering complete automation like pressing, heating, holding, cooling ( water circulation ).
• Transparent mould capability enabling seeing identification mark.
• Easy mould interchangeability Fast mould production.
• Moulds produced - 1 " , 1 1/4 " , 1 1/2 ".
• Heater - 1000 Watts Cooling - Automatic water circulation.
• Air pressure required - 150 PSI Electrical supply - Single phase.