We have wide range of Universal Testing Machines from 1 Kn to 2000 Kn Capacity for various applications. Every machine is calibrated in accordance with procedure laid down in BS 1610-1964 and 1828-1991. Computerized Universal Testing Machine comply
PENETROMETER WITH BATH FOR BITUMEN & TAR(Analog Version) Penetrometer with bath for Bitumen &Tar Test : As per IS: 1203/1978
Use: Used for the determination of penetration of asphaltic bitumen and fluxed asphalt and blown type
Compliance with following International Standards: As per IS: 516, IS: 9399, BS: 1881, ASTM C78 100 kN Capacity flexural machine with Digital Load Indicator cum controller.
To determine Melt Flow as per ASTM D1238 – “A”, “B” & “A + B”- METHOD & ISO 1133 Fully Computerised/Touch Screen. Other Standard Model is also available.
This instrument measures the
Abrasive Cut Off Machine Automatic and in Manual Version is availane from cutting Capacity 30 MM to 120 MM Dia.
Description:
Absolute minimal deformation, cool & burn-free sample production.
Effortless cutting by lever mechanism,
Description:
Double disc variable speed, backed up by high torque, noiseless D.C. motors of 1/2 HP, with D.C drives, driving discs independently.
Disc dia. - 200 mm. Continuous stepless variable speed up to 1400 r.p.m., with digital R.P.M.
On site non destructive inspection kit of mettalography, used where the conventional techniques of specimen preparation can not be applied. The kit of practicing mettalographers for any critical site applications considering the user friendliness,
Details:
150 mm 4 Part Cast Iron Cube Mould with cast iron or M.S. Base Plate
Weight of the the total Assembly 14 to 18 Kgs as per requirements.
All fasteners are white zinc plated.
150 x 300 mm Cast Iron Cylindrical Mould with Cast iron Base
DIGITAL TRIAXIAL SHEAR TEST APPARATUS- FOR 38 MM DIA SPECIMEN - FOR CD UU CU TEST
Compliance Standards : IS : 2720 (Part XII)
Set up consist of following parts and accessories:
Load Frame motorized capacity : 50 KN (5000 kgf) giving different
Submersible Agitator is a key equipment for Quenchant Tank Agitation in Heat Treatment process. The Airless agitation with 0.5-2.0 m/sec. velocity resulting in 8000 Degree C/min hot job cooling rate achieves the required properties.
Electronic Direct Shear Apparatus motorized with single speed with software. As per IS :2720 (PART 13) 1986 / IS : 11229 - 1985, Supplied without PC/Laptop or Printer.
Oscillating Disc type Rheometer is an efficient, easy-to-use, and reliable testing equipment. We have designed the instrument in accordance with ASTM and ISO 3417. Our machine very effectively and precisely process the characteristics of vulcanized
It is an instrument consisting of a motor driven disk within a die cavity formed by two dies maintained at specified conditions of temperature and die closure force. It measures the effect of temperature and time on viscosity of rubber or
Preparation of standard prisms with Automatic/Manual mixing procedure
Special Features:
Automatic / Manual Mortar Mixer
5 liter nominal capacity
Microprocessor control
Choice of automatic mixing cycles
Sand Dispenser
Water
VSP/HDT Teste_TS_3_Staions_Computerised
To determine the Vicat Softening Point (VSP) as per ASTM D1525/ISO 306.
Heat Deflection Tester (HDT) as per ASTM D648/ISO 75. Other Standard Model is also
Various Types of Cut Off Wheels , Diamond Wafering Blade , Various Fixtures, Hot Mounting Powder , Cold Mounting set, Diamond pastes , Clips, Abrasive papers in various grit plain or PSA Back. Etc.
